ASME B18.2.4.4M-1982(R1999) Metric Hex Flange Nuts
|
ID： |
7EC32E6FA6D24C9DAE08D0A037685CB7 |
|
文件大小(MB)： |
0.57 |
|
页数： |
16 |
|
文件格式： |
|
|
日期： |
2010-8-22 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
ANSI B18.2.4.4M-1982,30 June 1982,ACCEPTANCE NOTICE,This non-Government document was adopted on 30 June 1982, and is approved for,use by the Don. The indicated industry group has furnished the clearance required,by e x i s t i n g r e g u l a t i o n s . Copies o f t h e document are stocked by the DoD Single,Stock Point, Naval Publications and Forms Center, Philadelphia, PA 19120, for,i s s u e t o DoD a c t i v i t i e s o n l y . C o n t r a c t o r s and Industry groups must obtain coDies,directly fram:,The American Society of Mechanical Engineers,United Engineering Center, 345 E. 47th Street,New York, NY 1001 7 or,The American National Standards Insti tute,1430 Broadway, New York, NY 10018,T i t l e o f Dc,*:ument: Nut, Flange, Her-Metric,k.cun-ent No. : ANSI B18.2.4.4M-1982,Ca:? of Specific Issue Adopted: - 21 June 1982,Pel easi r,g industry Group: The American Society of Mechanical,Engineers,:t:!fiCE: When reaffirmation, amendment, revision, or cancellation o f this standard,is i n i t i a l l y proposed, the industry group responsible for this standard shall inform,t'le mi 1 itary coordinating activity of the proposed change and request participation.,Military Coordinating Activity:,Army - AR,( Project 5 31 O- 1044),Copyright ASME International,Provided by IHS under license with ASME,Document provided by IHS Licensee=Bureau Veritas/5959906001, 10/27/2004,20:13:29 MDT Questions or comments about this message: please call the Document,Policy Group at 303-397-2295.,--`,`,,,,``,,,,,,,`,`,```,`,-`-`,,`,,`,`,,`---,A M E R I C A N N A T I O N A L S T A N D A R D,Metric Hex Flange Nuts,ANSI B18.2.4.4M - 1982,REAFFIRMED 1999,Government Key Words:,Nut, Flange, Hex -,Metric,FOR CURRENT COMMITTEE PERSONNEL,PLEASE SEE ASME MANUALA S-1 1,SECRETARIAT,SOCIETY OF AUTOMOTIVE ENGINEERS,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,P U B l l S H E D BY,T H E A M E R I C A N S O C I E T Y OF M E C H A N I C A L E N G I N E E R S,United Engineering Center 345 East 47th Street New York, N.Y. 1001 7,Copyright ASME International,Provided by IHS under license with ASME,Document provided by IHS Licensee=Bureau Veritas/5959906001, 10/27/2004,20:13:29 MDT Questions or comments about this message: please call the Document,Policy Group at 303-397-2295.,--`,`,,,,``,,,,,,,`,`,```,`,-`-`,,`,,`,`,,`---,Date of Issuance: October 31, 1982,This code or standard was developed under procedures accredited as meeting the criteria for,American National Standards. The Consensus Committee that approved the code or standard was balanced,to assure that individuals from competent and concerned interests have had an opportunity to,participate. The proposed code or standard was made available to public review and comment which,provides an opportunity for additional public input from industry, academia, regulatory agencies,and the public-at-large.,ASME does not "approve." "rate," or "endorse" any item, construction, proprietary device, or,activity.,ASME does not take any position with respect to the validity of any patent rights asserted in connection,with any items mentioned in this document, and does not undertake to ensure anyone utilizing,a standard against liability for infringement of any applicable Letters Patent, nor assume any such,liability. Users of a code or standard are expressly advised that determination of the validity of any,such patent rights, and the risk of infringement of such rights, is entirely their own responsibility.,Participation by federal agency representative(s) or person(s) affiliated with industry is not to be,interpreted as government or industry endorsement of this code or standard.,No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior writtenp ermission of the publisher.,Copyright @ 1982 by,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,All Rights Reserved,Printed in U.S.A.,Copyright ASME International,Provided by IHS under license with ASME,Document provided by IHS Licensee=Bureau Veritas/5959906001, 10/27/2004,20:13:29 MDT Questions or comments about this message: please call the Document,Policy Group at 303-397-2295.,--`,`,,,,``,,,,,,,`,`,```,`,-`-`,,`,,`,`,,`---,FOREWORD,American National Standards CommitteeB 18 for the standardization of bolts,s crews, nuts, rivets and,similar fasteners was organized in March 1922, as Sectional Committee BI8 under the aegis of the American,Engineering Standards Committee (later the American Standards Association, then the United States of,America Standards Institute and, as of October 6, 1969, the American National Standards Institute, Inc.),with the Society of Automotive Engineers……
……